Brown Fused Alumina for Refractory Bricks

Specify the raw material role

A refractory brick may call for aggregate fractions, fine powder or a combination. The CHAOYAN product catalog provides separate grain and fine powder models, plus a dedicated refractory brick use case record. A purchase inquiry should state which form each line item represents.

The target chemical composition and particle size distribution depend on the buyer's brick design. The public product records do not justify copying one formula's values onto every refractory product. Ask for the corresponding product PDS, then write the approved limits into the order sheet.

Check the material in a brick trial

Label and test each candidate fraction. Hold the remaining formulation and production settings stable where possible. Record the brick properties required by the customer's application; raw grain data alone does not establish finished brick performance.

If the trial identifies a need for a nonstandard fraction, agree the upper and lower bounds, sieve method and packing label before repeat supply. Preserve the accepted sample and test report as references for later batches.

Selection guidance

Start at the refractory brick product and relevant grain or powder page. Include the proposed fraction, chemistry limits, annual quantity and target batch report format in the inquiry.

Common mistakes

• Using a castable grade assumption without checking the brick formulation.
• Merging several fractions under one unlabeled product code.