TECHNICAL GUIDE / 2026-11-20
Japan: What Japanese Buyers Verify First — Particle Size Consistency, JIS Numbers and Paper-Bag Packing
Japan is one of the largest buyers of artificial corundum in the world, and almost all of it arrives by ship from China. According to IndexBox, Japan imported 125,000 tons in 2024, worth about $115 million, with China supplying 92% of that volume, and consumption reached 117,000 tons. In a market this concentrated — the average import price stood at about $920 per ton in 2024 — buyers are not hunting for a bargain shipment. They are protecting a production line, where one off-spec delivery can stop a shift. So the first questions from a Japanese buyer are about the grain itself, not the price list. They verify, in a fixed order, and a supplier that fails an early check never reaches the price discussion. This article explains that order, so a first-time exporter knows what to prepare before sending an enquiry.
Source: IndexBox, "Japan – Artificial Corundum – Market Analysis" (https://www.indexbox.io/blog/artificial-corundum-japan-market-overview-2024-5/).
Check one: particle size consistency, lot after lot
The first thing a Japanese buyer verifies is whether the size distribution stays the same from one lot to the next. A single test report showing that F46 falls inside its size band proves very little. What the buyer wants is evidence that the tenth lot looks like the first: a sieve analysis showing the full distribution on every lot, compared across lots for drift, and checked again by the buyer's own sieve test on arrival. A supplier that keeps a retained sample from every lot earns trust quickly.
The grade matters here too: brown fused alumina is sold in grades by alumina content, and the right grade depends on the application — a resin grinding wheel and a refractory castable do not ask for the same thing. The point is not to push the highest grade, but to show that whatever grade was agreed, every lot actually meets it.
Check two: JIS numbers, not FEPA numbers
The second check is about the language of the specification. Japan's abrasive industry works with JIS standards — JIS R 6001 for macrogrits and JIS R 6002 for microgrits — while European and Chinese suppliers usually think in FEPA F and P designations. The two systems describe the same grain, but the numbers do not map one to one, and a buyer quoted in FEPA numbers alone has to do the conversion themselves. Quoting in JIS numbers, or showing the JIS equivalent next to the FEPA designation, removes a whole round of questions.
The honest way to handle the conversion is to treat published size tables as approximate: a JIS grit and its nearest FEPA grit are close, not identical, and the acceptance criterion should be the sieve distribution agreed in the order. Our F-grit size converter gives the approximate micron range for each FEPA F grit, and our guide to writing a grit specification across FEPA, JIS and ANSI explains how to lock the agreed distribution into the purchase document.
Japanese buyers also tend to specify by application rather than by grade alone: a coated abrasive plant buys P grit for backing paper and belts, a bonded wheel plant buys F grit. Quoting the right series — P grit for coated abrasives, F grit for bonded wheels and blasting — signals that the supplier understands the plant, not just the catalogue.
Check three: a batch test report the buyer can actually use
Once the grain and the numbers are settled, the buyer asks for documentation, and in Japan paperwork is treated as part of the product. A batch test report should arrive with the goods, identify the lot number printed on the bags, and list results the buyer can verify: chemical composition, sieve analysis, and magnetic content. A report that only states "passed" without figures is of little use, because the buyer cannot file it against their own incoming inspection — and the buyer will keep it on file and refer back to it if a later lot behaves differently. That is normal practice, not suspicion. Our test reports page shows the kind of batch documentation we provide, and our guide to reading a batch test report before you buy explains each line a buyer should look for.
Check four: paper bags on pallets, ready for a Japanese warehouse
The fourth check is physical: how the grain arrives. Japanese buyers commonly ask for 25 kg paper bags, palletized, with clear lot marking on every bag. Paper bags stack cleanly on pallets, open and reseal easily on the line, and avoid the handling problems of bulk bags in a humid climate. The pallet matters as much as the bag: a fumigation-free pallet, stretch-wrapped, with the lot number visible on the outside, lets the warehouse receive the goods without opening the shipment. Confirm the packing before quoting, not after: packing, pallet size, and marking are all agreed in the order. Our guide to export packing and labelling sets out the packing options we offer and how lot marking is handled.
Check five: a trial lot before a contract
Even after the four checks, a Japanese buyer will usually start with a trial lot rather than a contract. This is not a lack of trust — it is how qualification works in Japan. The trial lot runs through the buyer's own line, the results are compared with the batch report, and only then does the discussion move to regular volumes. Treat the trial as the real test, not a formality: ship it from the same production run and packing line that would serve the regular order, with the same lot marking and test report format. If the trial performs, the buyer has a documented reason to continue. Our guide to evaluating a brown fused alumina sample properly explains the five checks we recommend on any sample or trial lot.
Writing the first enquiry
A buyer that has read this far will usually write an enquiry in the same order they verify: grain and grade first, then the JIS designation, then packing, then quantity and port. Include five items from the start: the grade and alumina content, the grit size in JIS or FEPA terms, the quantity and whether it is a trial lot, the packing (25 kg paper bags on pallets is the usual starting point), and the destination port.
The short version
Japan buys a lot of artificial corundum, buys it almost entirely from China, and buys it carefully. Particle size consistency comes first, JIS numbers second, a usable batch test report third, paper-bag pallet packing fourth, and a trial lot last. A supplier that prepares those five things before the first enquiry does not need to compete on price — the buyer has already decided the supplier is worth talking to.
Luoyang Naibao New Materials Co., Ltd. supplies brown fused alumina in F and P grit series for bonded abrasives, coated abrasives, blasting and refractory applications, with batch test reports and export packing to the buyer's specification.


